JM Series Mirror silver ink printed instructions 

 Key Features: 
 JM Series Mirror silver ink applied to all types of glass, PS, PC, PET, PVC, PMMA, and hardening of the PMMA, PC mirror effect transparent material such as printing, plating mirror effect can be replaced. 

 Substrates: 
 JM Series Mirror silver ink is mainly used for glass, PS, PC, PET, PVC, PMMA, and hardening of the PMMA, PC and other transparent materials. 

 Pre-press processing: 
 1, the deployment of ink 
 Deployment of ink, please note the following: 
 a, please refer to "JM Series mirror ink performance schedule," choose to add the appropriate dose of curing agent; 
 b, inks and curing agent mixture should be full uniform mixing, pre-press put it aside for 2-3 minutes for the oil 
 Ink and curing agent have sufficient time to react. 
 c, add the curing agent, the ink usage time is shortened, the specific circumstances in the table below, the number of reference 
 Data. 
 2 stencil 
 JM Series printing inks usually choose 120-165T Switzerland (SEFAR) or Japan (NBC) net imports of polyester yarn, tension control about 45 degrees in the 20N ramp network. 
 3, squeegee 
 Polyurethane squeegee with 65-85 degrees, usually 75 degrees 

 Printing: 
 1, dilution 
 This series of ink added curing agent, curing agent reacts with the ink, printing process, ink viscosity and ink in order to ensure the process of using low-viscosity, need to add the appropriate amount of diluent to make the ink to keep more good printing viscosity. Specific dosage according to the actual printing conditions, and thinner models see table below. 
 2, auxiliary 
 1, the tension of dispersants (JR0013) 
 Ink ink solve the problem of pinhole and foaming, add the maximum amount of not more than 0.5%, exceeding the maximum dosage will affect the adhesion between the ink layer. 
 3, anti-pinhole cream (JR0025) 
 When the surface tension of the substrate is very low, around 3% can be added to the anti-pinhole cream, which can effectively solve the problem of the ink layer of the surface of the pinhole. 

 India deal: 
 1, dry 
 After printing, the need to put it aside for 10-15 minutes, the substrate, results appear to be mirror before entering the drying process. Drying the specific time table set out below. 
 2, adhesion test 
 JM Series mirror ink ink dry completely, resistant to alcohol, acid, alkali and other solvents, with 3M adhesive pull, ink can not afford oil, cook for 20 minutes with distilled water, ink can not afford oil. 
 3, environmental requirements 
 JM Series inks are not lead, mercury, cadmium and other heavy metals (1992 regulations), while the series of ink in full compliance with the European Union EN73 / 1 standard, the standard clearly defined the contents of the following eight metals: selenium, chromium, barium, arsenic, antimony, lead, cadmium, mercury. 

 JM Series mirror ink performance schedule 

 Ink type curing agent curing agent deployment thinner 
 Add